Most people are struggling with indoor storage space. The square footage for interiors is dwindling and it is almost impossible to get space for a chest of drawers and other furniture pieces for storage. Furthermore, people are all the keener nowadays on minimizing clutter in their interiors. This explains the increased popularity of open-plan living. The best way to get maximum storage space without using too much of your floor space is to install overhead cabinets.
The hardware and timber suppliers in Melbourne from where you will the get supplies for fastening your cabinets to the walls will undoubtedly have several options for you. The leading choice for your cabinets will depend on their weight and your type of wall. Light cabinets, for instance, might only need basic hardware while heavy ones will call for the use of substantial anchors.
Here are the different fastener types for cabinets in your home interior.
Inserts
These are used for block and concrete walls. The insert used in this alternative will expand when you drive a screw into it. Several size options exist for inserts, but the most common are 1/4 to 1-1/2 inch inserts. When installing the inserts, a masonry drill bit is first used to drill the holes into your desired location. The inserts are then pounded into the holes and sit flush with the concrete or block.
Conventional Screws
These are the most affordable options and are generally used for ready-made cabinets with rails. The kit for your prefabricated cabinet will comprise a metal rail for attaching the wall studs and long screws into your drywall. The coordinating screw will be fixed to the back of your cabinets. You will then hang the cabinets on a bar and then lock the brackets into the supplied rail before screwing them directly onto the rail from its inside.
Wood Screws
These are used for installing custom cabinets. The cabinets are generally built using ¾-inch hardwood solids and plywood. Custom cabinets are almost always installed using 3 or 3 ½ inch wood screws with a bulging head. These wood screws are sharp and feature a tapered head that will be buried below the cabinet’s surface. In most cases, you will not need washers for the screws since most people prefer to sink the screw’s head slightly into the surface for aesthetic reasons.
Keyhole Hangars
These are used for light and small cabinets. Keyhole inserts denote oval-shaped metal pieces measuring ¾-2 inches. The hangars have a slot on one end and are open on the other end. Keyhole hangars are mortised into the back rail of cabinets and will sit flush on either side of the cabinet. Your cabinet will slide into the keyhole hangar’s slot and be secured against your walls.
The above fasteners will make all the difference in the look and functionality of your cabinets. You cannot afford to get the fasteners for your cabinets from just any store. This is because you might be left with a cabinet whose strength and attachment is compromised and a safety hazard if you use an inexpensive and cheaply manufactured fastener.
